When you talk about accesories for your Suzuki Intruder, what do you think of first? I'm betting you don't think of Suzuki Intruder hand grips, do you? No, I bet you think of getting some motorcycle saddlebags, or maybe some new Suzuki Intruder handlebars, even. You probably entertain the idea of getting a custom paintjob for your gas tank, don't you?
But I would be surprised if you gave the handgrips much thought. You should though, and here's why:
Suzuki Intruder Hand Grips
There's nothing wrong with the stock handgrips that come on the Suzuki Intruder. In fact, I rather like them. They look good, they feel good, and they're comfortable enough on a long ride. But what if you want to customize your stock Intruder grips? Or worse yet, what if you find a great deal on an older Intruder (say, a 1986 Suzuki VS700 Intruder) and the rubber handgrips are torn up or rotted away? There's only thing you can do:
Buy new Intruder hand grips, of course!
But what kind do you buy? You can get replacement handgrips from a dealer, but I find that most dealer only replacement parts are too costly when you can just as easily get something with a lot more personality in the aftermarket segment.
Where do you get these new Intruder handgrips? From anywhere, really. I would look online for them, though, as you'll probably find them a lot cheaper from an online dealer than you would from your local Suzuki dealer.
What Suzuki Intruder Hand Grip Choices Do You Have?
You can get hand grips made specifically for the Suzuki Intruder. I've seen some great looking grips out there that are Intruder specific. All the way from solid chromed metal with maybe some nice, etched designs to chromed grips with rubber inserts to keep your hand cushioned from vibration and afford a little extra grip.
For that matter, if you really like them or you're trying to restore your motorcycle, then you can always go ahead and get Suzuki Intruder stock replacement grips, as well.
There are, however, other choices available. As long as the diameter is the same, nearly any grip will work.
What Grips Fit A Suzuki Intruder?
Because the Suzuki Intruder handlebars are one inch diameter, this means that in addition to the Suzuki Grips made for the Intruder, you have a huge selection of custom handle grips made for Harley's (which also have one inch handlebars) to choose from.
While the accessories for the Japanese cruiser market have come a long way over the last ten years or so, from what I can tell, there hasn't been much support for the older style cruisers, especially the Suzuki Intruders. It's a shame, really, but it's good to know that as you're a little bit mechanically inclined you can find plenty of Intruder accessories for you motorcycle that aren't neccessarily made for the Suzuki Intruder.
And when it comes to handgrips and handlebars, thanks to Harley there's a bucket load of them available.
So next time you're out looking for new accessories for your Intruder, make sure you don't overlook the handle grips. Take a good look around online, too. You'll find plenty of resources for your Suzuki Intruder Hand Grips.
Motorcycle Saddlebags For Suzuki Intruders
I'm going to stray just a bit here and talk for a moment not of Suzuki Intruders in particular, but of motorcycle saddlebags generally and for Suzuki Intruders.
Motorcycle Saddlebags
When your out and about riding through town on your Suzuki motorcycle (or any other brand, for that matter) sometimes it's nice to be able to stop at a store and pick up a few things to take home. Other times, like when you decide to take a long trip on your motorcycle, you need to be able to pack some personal effects to take with you. In a car, this is easy of course. On a motorcycle, not so much.
This is where saddlebags come into play.
For those of you who do not know, saddlebags resemble--and get their name from--the bags that the cowboys used to strap over their horses for the long trips. On a motorcycle, the mounting scheme is usually a bit different, but the overall idea remains largely the same.
Motorcycle saddlebags consist of two "bags" connected by a yoke. This whole setup is usually made of leather or a leatherlike material, though there are some manufacturers who use hard material, such as fiberglas or something similar, usually for the purpose of offering solid, waterproof construction. While hard saddlebags for motorcycles are okay in their place, in this post, I won't be delving into the hard saddlebags too much because they don't really fit well with the Suzuki Intruder motorcycle. An exception to this would be the big classic style cruiser of the Intruder LC1500 which works well in hard saddlebag, touring type setup.
Sometimes each of these bags contains pockets in addition to the main compartment, but usually it just one big compartent per side. Generally, a flap closes over the top of each one lengthwise and is secured by a snap on one end where the other end is sewn in. Another, larger, flap closes over this flap and is buckled into place by one, two, or three buckles.
The yoke is used to mount the saddlebags on the motorcycle, usually underneath the rear seat. This is simple enough, but you also need one other piece of equipment unless you want your saddlebags flying all over the place when you ride while getting beat up by the rear wheel. What is this extra piece of equipment? Glad you asked!
Saddlebag Supports
These are metal pieces shaped in a sort of a square "u." Each manufacturer has a specific method of attaching these so I can't go into too much detail. But generally, they either mount under the rear fender or between the fender and the fender rails. Once these are in place and you've got your yoke underneath the seat, all you have to do is tie or otherwise attach the saddlebags to this support. Now they won't sway and bounce all over the place when you ride.
Now that we know a little bit about these things and how to mount them, let's take a look the two main styles they come in.
These hang straight down and resemble in profile a square. They offer a lot of usable room and work well on a monoshock style motorcycle or cruisers that have a lot of space between the rear shocks and the end of the fender. On a more compact motorcycle with exposed shocks the bottom front corner of these bags must overlap the shock thereby causing the front of them to pooch out. While functionally this may have little impact, aesthetically it is very tacky.
Slant Saddlebags
If you take the straight saddlebags and slant them backward, this is what you get. Instead of resembling a square they look more like a parallelogram. While they do not offer as much usable room as the straight saddlebags do, they are a great option for those cruisers with a compact back end and exposed shocks. The slanted style means that the saddlebag can actually sit behind the shock instead of on top of it, thus bringing it back into an acceptably aesthetic profile. On a monoshock "soft tail" style motorcycle, however, I think these might look a little out of place.
Which Style of Motorcycle Saddlebags Is Right For Your Intruder?
While I've seen each style used, I can say without a doubt that I think the slant saddlebags fit the bill here. They sit comfortable behind the shocks and help to fill out the thin, almost anemic look of the back end while still keeping with the sleek look of the chopper cruiser. For a quality set, I would look into Willie and Max saddlebags, sissy bar bags, and toolbags. I've always had great luck and pleasant experiences with Willie & Max.
So the next time you're out looking to add something new to your Suzuki Intruder, do yourself a favor and pick up some nice motorcycle saddlebags.
Motorcycle Saddlebags
When your out and about riding through town on your Suzuki motorcycle (or any other brand, for that matter) sometimes it's nice to be able to stop at a store and pick up a few things to take home. Other times, like when you decide to take a long trip on your motorcycle, you need to be able to pack some personal effects to take with you. In a car, this is easy of course. On a motorcycle, not so much.
This is where saddlebags come into play.
For those of you who do not know, saddlebags resemble--and get their name from--the bags that the cowboys used to strap over their horses for the long trips. On a motorcycle, the mounting scheme is usually a bit different, but the overall idea remains largely the same.
Motorcycle saddlebags consist of two "bags" connected by a yoke. This whole setup is usually made of leather or a leatherlike material, though there are some manufacturers who use hard material, such as fiberglas or something similar, usually for the purpose of offering solid, waterproof construction. While hard saddlebags for motorcycles are okay in their place, in this post, I won't be delving into the hard saddlebags too much because they don't really fit well with the Suzuki Intruder motorcycle. An exception to this would be the big classic style cruiser of the Intruder LC1500 which works well in hard saddlebag, touring type setup.
Sometimes each of these bags contains pockets in addition to the main compartment, but usually it just one big compartent per side. Generally, a flap closes over the top of each one lengthwise and is secured by a snap on one end where the other end is sewn in. Another, larger, flap closes over this flap and is buckled into place by one, two, or three buckles.
The yoke is used to mount the saddlebags on the motorcycle, usually underneath the rear seat. This is simple enough, but you also need one other piece of equipment unless you want your saddlebags flying all over the place when you ride while getting beat up by the rear wheel. What is this extra piece of equipment? Glad you asked!
Saddlebag Supports
These are metal pieces shaped in a sort of a square "u." Each manufacturer has a specific method of attaching these so I can't go into too much detail. But generally, they either mount under the rear fender or between the fender and the fender rails. Once these are in place and you've got your yoke underneath the seat, all you have to do is tie or otherwise attach the saddlebags to this support. Now they won't sway and bounce all over the place when you ride.
Now that we know a little bit about these things and how to mount them, let's take a look the two main styles they come in.
- Straight Saddlebags
- Slanted Saddlebags
These hang straight down and resemble in profile a square. They offer a lot of usable room and work well on a monoshock style motorcycle or cruisers that have a lot of space between the rear shocks and the end of the fender. On a more compact motorcycle with exposed shocks the bottom front corner of these bags must overlap the shock thereby causing the front of them to pooch out. While functionally this may have little impact, aesthetically it is very tacky.
Slant Saddlebags
If you take the straight saddlebags and slant them backward, this is what you get. Instead of resembling a square they look more like a parallelogram. While they do not offer as much usable room as the straight saddlebags do, they are a great option for those cruisers with a compact back end and exposed shocks. The slanted style means that the saddlebag can actually sit behind the shock instead of on top of it, thus bringing it back into an acceptably aesthetic profile. On a monoshock "soft tail" style motorcycle, however, I think these might look a little out of place.
Which Style of Motorcycle Saddlebags Is Right For Your Intruder?
While I've seen each style used, I can say without a doubt that I think the slant saddlebags fit the bill here. They sit comfortable behind the shocks and help to fill out the thin, almost anemic look of the back end while still keeping with the sleek look of the chopper cruiser. For a quality set, I would look into Willie and Max saddlebags, sissy bar bags, and toolbags. I've always had great luck and pleasant experiences with Willie & Max.
So the next time you're out looking to add something new to your Suzuki Intruder, do yourself a favor and pick up some nice motorcycle saddlebags.
Suzuki Intruder Handlebars
A post about Suzuki Intruder Handlebars?
You bet!
You may be thinking to yourself, "Why is he posting about this? What's so siginificant about handlebars that they deserve their own page?" I'll you, there's plenty of significance there, as we will soon see.
Stock Suzuki Intruder Handlebars
If you're intersted in different styles of handlebars for your Intruder, than you don't really have to look any further than the past and present selection of stock handlebars. In fact, just off the top of my head, I can think of three different styles of which you can choose.
Drag Bars
I know you've seen this style before: The bar is either a straight or slightly bent piece of usually chromed pipe that extends out a short distance from the risers in a flat path. Generally, a different set of risers is needed when using this setup because most stock risers are too short and will cause the handgrips to hit the gas tank when turning fully.
Not many stock cruisers come with them, but sometimes you can get them as an option. I believe that unless it is a specialty or custom motorcycle then most riders would rather something a little less extreme and since the drag bars need high risers, most companies will only offer one choice. Also, like many things, styles fade in and out of fashion.
An example of a cruiser that offered drag bars as an option was the 1986 VS700 Intruder.
Ape Hanger Handlebars or Chopper Style Bars
These are my favorites and I believe it this style that suits the Suzuki Intruder best.
Ape hanger handlebars are the kinds of bars you see on all the old choppers in all the old chopper movies. You also see them on a lot of custom cruisers (including the Intruders) riding the roads these days, as well. They are tall and need no special risers--the stock ones will do just fine. Of course, if you get custom ape-hangers then you might need longer brake and clutch cables but that's a whole nother story!
Now, the stock Intruder ape hangers are not extreme like what you would see on many customs, but they do fit the chopper-esque profile of the motorcycle quite well. They can be positioned in several ways to afford a comfortable ride for most people.
This is the style that most all of the Intruders came with, including the Suzuki VS1400 and the Suzuki VS800 Intruder.
Classic Style Low and Wide Bars
Ah, my least favorite stock style. I will not dwell on these long as I feel they do not fit in line with a stock Intruder (though I have seen some nice customs that implement them well!). These are a relatively new addition to the Intruders and I believe is Suzuki's attempt at trying to appeal to the "classic" crowd.
A Handy Tip For Custom Handlebars
If you're looking for something a little different (or a lot!) then I suggest you take a look at the American made motorcycles. They have one-inch handlebars just like the Suzuki's do. And if you look up any Harley dealer, you'll find a very wide selection to choose from.
I know this only scratched the surface of Suzuki Intruder Handlebars, but I hope it gave you a good idea of what's on offer.
You bet!
You may be thinking to yourself, "Why is he posting about this? What's so siginificant about handlebars that they deserve their own page?" I'll you, there's plenty of significance there, as we will soon see.
Stock Suzuki Intruder Handlebars
If you're intersted in different styles of handlebars for your Intruder, than you don't really have to look any further than the past and present selection of stock handlebars. In fact, just off the top of my head, I can think of three different styles of which you can choose.
- Drag Bars
- Chopper Style Bars
- Low and Wide Bars
Drag Bars
I know you've seen this style before: The bar is either a straight or slightly bent piece of usually chromed pipe that extends out a short distance from the risers in a flat path. Generally, a different set of risers is needed when using this setup because most stock risers are too short and will cause the handgrips to hit the gas tank when turning fully.
Not many stock cruisers come with them, but sometimes you can get them as an option. I believe that unless it is a specialty or custom motorcycle then most riders would rather something a little less extreme and since the drag bars need high risers, most companies will only offer one choice. Also, like many things, styles fade in and out of fashion.
An example of a cruiser that offered drag bars as an option was the 1986 VS700 Intruder.
Ape Hanger Handlebars or Chopper Style Bars
These are my favorites and I believe it this style that suits the Suzuki Intruder best.
Ape hanger handlebars are the kinds of bars you see on all the old choppers in all the old chopper movies. You also see them on a lot of custom cruisers (including the Intruders) riding the roads these days, as well. They are tall and need no special risers--the stock ones will do just fine. Of course, if you get custom ape-hangers then you might need longer brake and clutch cables but that's a whole nother story!
Now, the stock Intruder ape hangers are not extreme like what you would see on many customs, but they do fit the chopper-esque profile of the motorcycle quite well. They can be positioned in several ways to afford a comfortable ride for most people.
This is the style that most all of the Intruders came with, including the Suzuki VS1400 and the Suzuki VS800 Intruder.
Classic Style Low and Wide Bars
Ah, my least favorite stock style. I will not dwell on these long as I feel they do not fit in line with a stock Intruder (though I have seen some nice customs that implement them well!). These are a relatively new addition to the Intruders and I believe is Suzuki's attempt at trying to appeal to the "classic" crowd.
A Handy Tip For Custom Handlebars
If you're looking for something a little different (or a lot!) then I suggest you take a look at the American made motorcycles. They have one-inch handlebars just like the Suzuki's do. And if you look up any Harley dealer, you'll find a very wide selection to choose from.
I know this only scratched the surface of Suzuki Intruder Handlebars, but I hope it gave you a good idea of what's on offer.
Privacy Policy
Click to View the Current Updated Privacy Policy
###
###
This privacy policy tells you how we use personal information collected at this site. Please read this privacy policy before using the site or submitting any personal information. By using the site, you accept the practices described here.
Collection of Information
We collect personally identifiable information, like names, email addresses, etc., when voluntarily submitted by our visitors. The information you provide is used to fulfill your specific request, unless you give us permission to use it in another manner, for example, to add you to one of our mailing lists.
Cookie/Tracking Technology
Our site may use cookies and tracking technology which are useful for gathering information such as browser type and operating system, tracking the number of visitors to the site, and understanding how visitors use the Site. Personal information cannot be collected via cookies and other tracking technology, however, if you previously provided personally identifiable information, cookies may be tied to such information. Third parties such as our advertisers may also use cookies to collect information in the course of serving ads to you. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer.
Distribution of Information
We do not share your personally identifiable information to any third party for marketing purposes. However, we may share information with governmental agencies or other companies assisting us in fraud prevention or investigation. We may do so when: (1) permitted or required by law; or, (2) trying to protect against or prevent actual or potential fraud or unauthorized transactions; or, (3) investigating fraud which has already taken place.
Commitment to Data Security
Your personally identifiable information is kept secure. Only authorized staff of this site (who have agreed to keep information secure and confidential) have access to this information. All emails and newsletters from this site allow you to opt out of further mailings.
Privacy Contact Information
If you have any questions, concerns, or comments about our privacy policy you may contact us using the information below:
By e-mail:suzukiintruderman@gmail.com
We reserve the right to make changes to this policy. You are encouraged to review the privacy policy whenever you visit the site to make sure that you understand how any personal information you provide will be used.
I Like Suzuki Intruders
Why do I like Suzuki Intruders? Let me count the ways.
Suzuki Intruders Are Small and Powerful
It does not matter whether you're talking the original VS700 or the mid sized motorcycle that eventually replaced it, the Suzuki VS800 Intruder. In fact, even the Suzuki VS 1400, which is nearly the same size as its mid-size little brothers but packs almost twice the engine, is still small but quite powerful. This holds true, in my experience, across the entire VS line.
Now, when you get into the classic style Intruder, the LC1500, even though it has a bigger motor than the 1400, and even though it is still classified as an Intruder by Suzuki, one would be hard pressed to call this behemoth a small motorcycle. Therefore, only those models that who fits the chopper profile are to be considered both small and powerful.
You may be thinking that there are a lot of cruiser motorcycles with engines in the same class as these, so what makes the Suzuki Intruders different?
I will tell you.
The difference between most of these cruisers is exactly what makes the Intruder so strong by comparison. While most of these other motorcycles are big and bulky with extraneous cosmetics to make them appear bigger and badder than what they are, the VS series, with its stripped down, lean and clean profile, is as light as can be.
How does this make a difference?
If you take two engines that are identical and put one of them on a motorcycle that weighs 400 pounds and the other one in a motorcycle that weighs 600 pounds, which one do you think will perform better? That's right, the one with less weight to carry.
You'll see why I like this setup in the next section.
Suzuki Intruders Are Excellent For Defensive Driving
Have you ever been riding in bumper to bumper traffic and had a car driver cut you off because they either did not see you (because they did not look) or they didn't care? Well, if you've been riding a motorcycle for longer than a week, I'm sure this has happened to you at least once.
I know first hand that it does not matter how big the motorcycle you're riding is, these car drivers still think they can push you around, and that's why you have to ride defensively. And what's the best kind of motorcycle to be on when you have swerve instantly away from a car?
A light, responsive one, of course.
And unless you want ride a plain jane street bike or a crotch rocket, then your choices are limited.
Good thing the Intruder gives you a lightweight cruiser with plenty of punch, perfect for evasive, nimble maneuvering in sleek, cruiser style packaging.
And speaking of style...
Suzuki Intruders Have a Style All Their Own
Boy, do they. I could go on and on here about how utterly awesome these rides are, but when it comes down to it, you've just got to see one in person to appreciate the true beauty and attitude it possesses. But since you can't put an actual live object on the internet, here's a photograph of this steel steed, just to whet your appetite.
- Intruders are small but powerful
- Intruders are excellent for defensive driving
- Intruders have a styling all their own
Suzuki Intruders Are Small and Powerful
It does not matter whether you're talking the original VS700 or the mid sized motorcycle that eventually replaced it, the Suzuki VS800 Intruder. In fact, even the Suzuki VS 1400, which is nearly the same size as its mid-size little brothers but packs almost twice the engine, is still small but quite powerful. This holds true, in my experience, across the entire VS line.
Now, when you get into the classic style Intruder, the LC1500, even though it has a bigger motor than the 1400, and even though it is still classified as an Intruder by Suzuki, one would be hard pressed to call this behemoth a small motorcycle. Therefore, only those models that who fits the chopper profile are to be considered both small and powerful.
You may be thinking that there are a lot of cruiser motorcycles with engines in the same class as these, so what makes the Suzuki Intruders different?
I will tell you.
The difference between most of these cruisers is exactly what makes the Intruder so strong by comparison. While most of these other motorcycles are big and bulky with extraneous cosmetics to make them appear bigger and badder than what they are, the VS series, with its stripped down, lean and clean profile, is as light as can be.
How does this make a difference?
If you take two engines that are identical and put one of them on a motorcycle that weighs 400 pounds and the other one in a motorcycle that weighs 600 pounds, which one do you think will perform better? That's right, the one with less weight to carry.
You'll see why I like this setup in the next section.
Suzuki Intruders Are Excellent For Defensive Driving
Have you ever been riding in bumper to bumper traffic and had a car driver cut you off because they either did not see you (because they did not look) or they didn't care? Well, if you've been riding a motorcycle for longer than a week, I'm sure this has happened to you at least once.
I know first hand that it does not matter how big the motorcycle you're riding is, these car drivers still think they can push you around, and that's why you have to ride defensively. And what's the best kind of motorcycle to be on when you have swerve instantly away from a car?
A light, responsive one, of course.
And unless you want ride a plain jane street bike or a crotch rocket, then your choices are limited.
Good thing the Intruder gives you a lightweight cruiser with plenty of punch, perfect for evasive, nimble maneuvering in sleek, cruiser style packaging.
And speaking of style...
Suzuki Intruders Have a Style All Their Own
Boy, do they. I could go on and on here about how utterly awesome these rides are, but when it comes down to it, you've just got to see one in person to appreciate the true beauty and attitude it possesses. But since you can't put an actual live object on the internet, here's a photograph of this steel steed, just to whet your appetite.
And there you go, three reasons why I like Suzuki Intruders.
Suzuki VS800 Intruder
After the success of the last two incarnations (the Suzuki Intruder VS700 in 1985 and the Suzuki Intruder VS750 in 1987, to be exact) Suzuki stepped it up a notch and released the Suzuki VS800 Intruder in 1992.
Entering the 800 Class
After the 750 had a good run of five years Suzuki decided to step it up a notch. They added another 50 cubic centimeters or so to the proven 45-degree v-twin and found that they had a real contender for the mid-size cruiser class on their hands.
Like the previous models, this Intruder featured four valves per cylinder (a pair of intake valves and a pair of exhaust valves). This innovation (which may have been somewhat common in the sport bikes of the time but was virtually unheard of in any of the chopper-style v-twin motorcycles) allowed for a smaller engine to produce more power by using its fuel more efficiently, thereby utilizing all of its available power to drive the pistons, crankshaft, gears, and finally the drive shaft and rear tire.
Big deal, you might be thinking, after all, all motorcycles put their power to the rear wheel!
That's true, but not all motorcycles are able to harness as much useable power as this might VS800.
In fact, for a shaft driven and water-cooled motorcycle (the water system adds more overall weight and the drive shaft takes more power to operate than a chain) that only possess eight-hundred cc's, it packed a big punch when it came to acceleration. Indeed, given the right circumstances, it could even out perform its big brother, the Suzuki VS1400 Intruder!
A Few Changes
Aside from a few minor tweaks made to the cosmetics of the Intruder that are not worth dwelling on, the new 800 version received two significant changes. One is the aforementioned increased engine size. The other is purely cosmetic but in many riders' opinions takes the Japanese cruiser from okay to perfect. The change? Suzuki increased the diameter of the front wheel from 19" to 21". (This would change again years later when Suzuki decided to change the Intruder brand and replace the name with a letter and a number, but that's neither here nor there right now.)
This Intruder Remains the Same
As I said, other than the two big changes mentioned previously, this particular line remained largely intact with the introduction of the VS800. The engine stayed water-cooled; the narrow, clean, uncluttered profile remained unchanged; no new changes were implented to the exhaust system. Likewise, the intake system kept the traditional carburetors as opposed to going fuel injected. By and large, this new cruiser was the same motorcycle albeit with a larger engine and bigger tire.
But then, when you have something that works, why fix what's not broken? And judging by the amount of these cruisers you see on the road there are many riders who feel the Suzuki VS800 Intruder needs absolutely no fixing.
Entering the 800 Class
After the 750 had a good run of five years Suzuki decided to step it up a notch. They added another 50 cubic centimeters or so to the proven 45-degree v-twin and found that they had a real contender for the mid-size cruiser class on their hands.
Like the previous models, this Intruder featured four valves per cylinder (a pair of intake valves and a pair of exhaust valves). This innovation (which may have been somewhat common in the sport bikes of the time but was virtually unheard of in any of the chopper-style v-twin motorcycles) allowed for a smaller engine to produce more power by using its fuel more efficiently, thereby utilizing all of its available power to drive the pistons, crankshaft, gears, and finally the drive shaft and rear tire.
Big deal, you might be thinking, after all, all motorcycles put their power to the rear wheel!
That's true, but not all motorcycles are able to harness as much useable power as this might VS800.
In fact, for a shaft driven and water-cooled motorcycle (the water system adds more overall weight and the drive shaft takes more power to operate than a chain) that only possess eight-hundred cc's, it packed a big punch when it came to acceleration. Indeed, given the right circumstances, it could even out perform its big brother, the Suzuki VS1400 Intruder!
A Few Changes
Aside from a few minor tweaks made to the cosmetics of the Intruder that are not worth dwelling on, the new 800 version received two significant changes. One is the aforementioned increased engine size. The other is purely cosmetic but in many riders' opinions takes the Japanese cruiser from okay to perfect. The change? Suzuki increased the diameter of the front wheel from 19" to 21". (This would change again years later when Suzuki decided to change the Intruder brand and replace the name with a letter and a number, but that's neither here nor there right now.)
This Intruder Remains the Same
As I said, other than the two big changes mentioned previously, this particular line remained largely intact with the introduction of the VS800. The engine stayed water-cooled; the narrow, clean, uncluttered profile remained unchanged; no new changes were implented to the exhaust system. Likewise, the intake system kept the traditional carburetors as opposed to going fuel injected. By and large, this new cruiser was the same motorcycle albeit with a larger engine and bigger tire.
But then, when you have something that works, why fix what's not broken? And judging by the amount of these cruisers you see on the road there are many riders who feel the Suzuki VS800 Intruder needs absolutely no fixing.
What about my suzuki VS700 intruder?
I was asked a question the other day by a motorcycle rider friend of mine that I had not seen in many years. He asked me:
What about my Suzuki Intruder VS700?
Did I still ride it? Did it still look the same? Was it still a hot looking customized Japanese cruiser?
Yes, yes, and yes, I answered him.
But those three answers weren't quite the truth... You see, while my Intruder still looks the same and is still a hot looking customized Japanese cruiser, I unfortunately haven't been able to ride it lately... Why? Because the last time I tried to take it out for a spin, it wouldn't even start. I looked at the engine and discovered the rear carburetor was just spitting and overflowing with fuel. Turns out I need to replace the diaphragms and possible the needles as well. Unfortunately, this is a long, time consuming and not altogether inexpensive project.
Now, it wasn't an entire lie... I still ride, just not this particular custom Suzuki Intruder at this particular point in time!
Still, the question did get me thinking: Here I am telling all of you about these great motorcycles but I haven't told you anything at all really about mine. For all you know, I might not even have a ride, let alone a cool one!
So where were we? Oh yes, what about my suzuki VS700 intruder? I'll tell you: it's awesome.
The Suzuki Intruder Handlebars
It's a 1986 model and while it originally had the drag bar I replaced it with the ape-hangers handlebars (not true ape hangers, mind you, but styled after them--in fact, these have the look but are much more manageable) that came on other models of the same motorcycle. Many people prefer the dragbars but I myself like the look and feel of the chopper-style bars.
The Wire Wheels
It also has the true aluminum wire wheels as opposed to the mag wheels made to simulate wire wheels. While this makes for more expensive and labor intensive tire changes (because not only do you have to the tires but you need to also replace the innertube as well), I feel the trade off is much more than worth it when it comes to the aesthetics of the overall package. Afterall, you don't put mags on an old school styled chopper/cruiser!
The Custom Paintjob
The factory paintjob was black and let me tell you, when I say it was black, it was black! The gas tank (obviously); the frame; the radiator cover; the front fender; the rear fender; the side covers--all a glossy black. There's nothing wrong with this color scheme, but I wanted something a little more "me," a little more "custom." So I took it apart, sanded everything down, repainted it a nicer colored-black and then added traditional flames to the front fender, side covers, and gas tank. On the rear fender, I added my own little logo using the same color-scheme as the flames. All in all, it turned out to be a real looker!
The Chrome
Now when I bought this motorcycle it wasn't in the best of shape, but it wasn't bad, either. Like most older model motorcycles, though, the chrome left something to be desired. It was pitted and the bare parts underneath were either rusted or corroded. The chromed plastic pieces left something to be desired as well. After fixing everything else, these parts looked even worse! Unfortunately, as you all know, refinishing chrome motorcycle parts is not an inexpensive adventure by any means.
So I had a bit of a brainstorm.
Instead of refinishing them, I painted them flat-black! The engine cases, the valve covers, the triple trees, the risers... Much to my surprise, it started to look so good that I continued the theme and customized the rest of the Intruder in midnight accents whether it needed it or not. I think this more than anything made the ride stand out from the crowd!
The Extra Stuff
I got rid of the ugly back fender and replaced it with a unique fiberglas one from Highway Hawk. I don't know if they make it anymore, but instead of having one huge breaklight, it's got two nice round ones that tuck in under the fender. I also removed the sissy bar. I changed out the square mirrors for some oval mirrors. I also got rid of the two-into-two stock exhaust and threw on a two-into-one DG/Hard Krome guarnanteed never to blue slashcut system. A new seat and a set of saddlebags and a toolbag later and I was in imported hog heaven!
Until I can get my camera working and get some pictures up, from now on, whenever anyone asks me, What about my suzuki VS700 intruder? I can point them to my Suzuki Intruder Resource blog and they can compare this post with my stock Suzuki Intruder VS700 post to get an idea of jsut what can be done to a not so ordinary cruiser with just a little imagination.
What about my Suzuki Intruder VS700?
Did I still ride it? Did it still look the same? Was it still a hot looking customized Japanese cruiser?
Yes, yes, and yes, I answered him.
But those three answers weren't quite the truth... You see, while my Intruder still looks the same and is still a hot looking customized Japanese cruiser, I unfortunately haven't been able to ride it lately... Why? Because the last time I tried to take it out for a spin, it wouldn't even start. I looked at the engine and discovered the rear carburetor was just spitting and overflowing with fuel. Turns out I need to replace the diaphragms and possible the needles as well. Unfortunately, this is a long, time consuming and not altogether inexpensive project.
Now, it wasn't an entire lie... I still ride, just not this particular custom Suzuki Intruder at this particular point in time!
Still, the question did get me thinking: Here I am telling all of you about these great motorcycles but I haven't told you anything at all really about mine. For all you know, I might not even have a ride, let alone a cool one!
So where were we? Oh yes, what about my suzuki VS700 intruder? I'll tell you: it's awesome.
The Suzuki Intruder Handlebars
It's a 1986 model and while it originally had the drag bar I replaced it with the ape-hangers handlebars (not true ape hangers, mind you, but styled after them--in fact, these have the look but are much more manageable) that came on other models of the same motorcycle. Many people prefer the dragbars but I myself like the look and feel of the chopper-style bars.
The Wire Wheels
It also has the true aluminum wire wheels as opposed to the mag wheels made to simulate wire wheels. While this makes for more expensive and labor intensive tire changes (because not only do you have to the tires but you need to also replace the innertube as well), I feel the trade off is much more than worth it when it comes to the aesthetics of the overall package. Afterall, you don't put mags on an old school styled chopper/cruiser!
The Custom Paintjob
The factory paintjob was black and let me tell you, when I say it was black, it was black! The gas tank (obviously); the frame; the radiator cover; the front fender; the rear fender; the side covers--all a glossy black. There's nothing wrong with this color scheme, but I wanted something a little more "me," a little more "custom." So I took it apart, sanded everything down, repainted it a nicer colored-black and then added traditional flames to the front fender, side covers, and gas tank. On the rear fender, I added my own little logo using the same color-scheme as the flames. All in all, it turned out to be a real looker!
The Chrome
Now when I bought this motorcycle it wasn't in the best of shape, but it wasn't bad, either. Like most older model motorcycles, though, the chrome left something to be desired. It was pitted and the bare parts underneath were either rusted or corroded. The chromed plastic pieces left something to be desired as well. After fixing everything else, these parts looked even worse! Unfortunately, as you all know, refinishing chrome motorcycle parts is not an inexpensive adventure by any means.
So I had a bit of a brainstorm.
Instead of refinishing them, I painted them flat-black! The engine cases, the valve covers, the triple trees, the risers... Much to my surprise, it started to look so good that I continued the theme and customized the rest of the Intruder in midnight accents whether it needed it or not. I think this more than anything made the ride stand out from the crowd!
The Extra Stuff
I got rid of the ugly back fender and replaced it with a unique fiberglas one from Highway Hawk. I don't know if they make it anymore, but instead of having one huge breaklight, it's got two nice round ones that tuck in under the fender. I also removed the sissy bar. I changed out the square mirrors for some oval mirrors. I also got rid of the two-into-two stock exhaust and threw on a two-into-one DG/Hard Krome guarnanteed never to blue slashcut system. A new seat and a set of saddlebags and a toolbag later and I was in imported hog heaven!
Until I can get my camera working and get some pictures up, from now on, whenever anyone asks me, What about my suzuki VS700 intruder? I can point them to my Suzuki Intruder Resource blog and they can compare this post with my stock Suzuki Intruder VS700 post to get an idea of jsut what can be done to a not so ordinary cruiser with just a little imagination.
Subscribe to:
Posts (Atom)